Best Easy Fishing Knots, How To Tie Fishing Line

Best Easy Fishing Knots, How To Tie Fishing Line

Sharing is caring!

An important part of fishing is knowing your knots. This can save you time and from frustration when you are out there fishing. You will need to tie different knots for different circumstances. A knot intended for a line to a hook is going to be different than a knot meant to tie two lines together. Easy fishing knots can make the difference between a good fishing trip and a bad one.

Easy Fishing Knots for a Successfull Day of Fishing

There are some things to remember when creating easy fishing knots. Ensure that you choose the right knot for the situation and know how to tie it correctly. Moisten the knots by adding water or saliva, and tighten the knots properly, and cut off any loose strands.

Easy Fishing Knot for Tying a Line to a Hook

You want strong and easy fishing knots you can count on when tying line to the hook.

The Clinch Knot

How To Tie The Clinch Knot Video Tutorial

Although the Clinch Knot has been replaced with the Improved Clinch Knot (see below) by many, some anglers insist the original Clinch Knot is the way to go. These anglers argue that this technique is easy and reliable, especially when re-rigging in regards to the fly fishing application of using a two-fly rig. Use the Clinch Knot with the top fly. Then make a loop on the end of the piece of tippet to tie the dropper line to the fly’s hook. Secure that to the hook of the top fly. Use the Clinch Knot again with the bottom fly. Three regular Clinch Knots saves you half the time than three other knots you might use. 

  1. Pull the line through the eye of the hook.
  2. Fold the line, and press the lines together.
  3. Twist the line approximately five to seven times below the hook.
  4. Take the end of the line back up through the opening behind the hook, and pull to tighten the knot.

For fly fishing, skip the first step and use the rest of the steps to make a loop and put that loop over the first fly’s hook, pulling tight.

The Improved Clinch Knot 

Tying the Improved Clinch Knot Correctly - Fly Fishing and Dreams

This is a popular knot for anglers when tying terminal tackle to monofilament line. This is a variant of the original Clinch Knot (see above) that has become a favorite among most fishermen because of its simplicity and reliability. Learn and try both methods to see which one is the best fit for you. This technique can be hard to use in lines with greater than 25 pounds breaking strength. It is also not recommended for braided line.

  1. Slide the line through the eye of the hook, and then wrap the loose end around the line five to seven times. 
  2. Take the loose end, and slide it through the loop that is closest to the eye of the hook. 
  3. Then tuck the end back around the inside of the loose section of the line. 
  4. Tighten both ends with a pull. If you need to, cut the end of the line.

Snelling a Hook

How to snell a hook - Easy, quick and idiot-proof way to snell a fish hook
  1. Pull the end of the monofilament line through the eye of the hook twice to make a loop that hangs beside the hook. 
  2. Take the loop and wrap it around the hook five to ten times, so it creates tight coils. 
  3. Pull the line up while holding the coils. 
  4. Pull until the loop is tight underneath the coils.

Palomar Knot

Palomar Knot - Quick Tutorial on How to Tie This Strong Knot

The Palomar Knot is the best knot to use with braided line. This knot holds up better than most knots, and that is why it is the most used and favorite of all easy knots.

  1. Make a loop by doubling the line. 
  2. Thread the loop through the eye of the hook, and make a slack overhand knot. 
  3. Take the loop around the end of the hook. 
  4. Tighten the line by pulling the end and if necessary, trim the loose end.

Uni Knot

How To Tie A Uni Knot - For braid and monofilament

The Uni Knot is used to tie monofilament or braid line to any terminal tackle. Anglers that favor this knot find it reliable and easier to create than the Improved Clinch Knot. This knot is also known as the Hangman’s knot.

The Uni Knot is one of the most multi-purpose, easy fishing knots. It can also be used for tying two lines together or a line to a reel.

  1. Pull the line through the eye of the hook and fold back to the standing line. 
  2. Create a loop by laying the end of the line over the doubled line.
  3. Wrap the end of the line around the double line about six times and then take it through the loop.
  4. Pull and tighten.
  5. Leave a small loop if desired or slide the knot down to the eye of the hook.

Easy Fishing Knot for Tying a Thin Line to a Small Hook

A strong easy fishing knot for this is important, because you want a knot that will hold.

Turle Knot

Fishing Knots: How to tie a Turle knot
  1. Thread the line through the eye of the hook. 
  2. Make a loose double overhand knot at the end of the line. 
  3. Take the open loop over the hook. 
  4. Pull and tighten so that the loop tightens around the eye.

Easiest Fishing Knot to Tie Lines of Similar or Different Strengths

Not every fishing knot can successfully connect lines of different strengths. You will want to know the knots that can do the job.

Double Uni Knot

Fishing Knot - Learn How To Easily Tie A Double Uni Knot

This knot is effective and simpler than the Blood Knot. It works well in tying two lines of different lengths together or can be used to tie two similar lines together.

  1. Overlap the ends of both lines. 
  2. Take one line, fold it back and wrap it around both lines three to four times.
  3. Pull it through the loop made from the wraps.
  4. Pull to tighten.
  5. Repeat steps above with the other end. Ensure there are the same amount of wraps as the first time, unless it is braided line. If it is braided line, double the number of wraps.
  6. Pull to slide the knots together.

Other Knots for Joining Two Sections of a Line Together

You do not want to take the chance of your lines breaking, so choosing the right fishing knot is crucial when connecting two lines.

Blood Knot

Fishing Knots: How To Tie A Blood Knot

The International Game Fish Association acknowledges the Blood Knot as one of the best knots for tying two lines together.

  1. Wrap a line around the other one five to seven times. 
  2. Then wrap the other line around the first five to seven times. 
  3. Bring the ends of each line to the middle, pull them through and then pull each end to tighten. 

Surgeon’s Knot

The Surgeon’s Knot is an easy and quick fishing knot. This is the best knot to use if you are in a hurry, as its strength holds up when created properly.

  1. Lay lines on top of each other, overlapping by several inches.
  2. Create a loop.
  3. Take the end of the line and the entire other line through the loop twice.
  4. Tighten.

Double Surgeon’s Knot

How to tie the double surgeons knot
  1. You will want to turn up the end of the line, creating a double line. 
  2. Make a single overhand knot. 
  3. Take the loop through the hole in the knot once more, and tighten the knot.

Easy Fishing Knots For Attaching Wire Line to Monofilament

You need a good, reliable fishing knot to hold these together. 

Wire Line to Mono Knot

  1. Take four inches of the end of the wire and fold it over itself. 
  2. Put the monofilament though the middle of the wire’s loop and wrap it around the bottom of the loop once and then wrap it around both lines seven times. 
  3. Pull the loose end of the monofilament line above the middle strand of monofilament and below the wire line, and tighten.

Easy Fishing Knots to  Attach Line to a Leader Loop or Snelled Hook to a Line

Great and easy fishing knots executed correctly will hold through all kinds of fishing situations, and ease any frustrations when it comes to knots holding.

Knotless Knot

Knotless Knot Tutorial

The Knotless Knot is the easiest way to snell a hook. The main use of this easy fishing knot is to attach the line to the hook, but there are other uses as well.

  1. Create a loop at the end of the line.
  2. Pull the other end of the line through the eye. Pull it through from the front of the hook to the back. 
  3. Wrap from the shank toward the end of the line approximately seven to eight times. These lines must be aligned side by side and not overlapping.
  4. Grab the other end of the line and pull it from the back to the front of the eye of the hook.
  5. Tighten the line.

Tucked Sheet Bend

Learn How To Tie A Tucked Sheet Bend - Simple
  1. Take the end of the line through the loop. 
  2. Create a simple sheet bend knot. 
  3. Pull the end of the line back through the loop of the sheet fold and tighten.

Easy Fishing Knot to Tie a Line to a Reel or Spool

Arbor Knot

The Arbor Knot’s purpose is to have a knot strong enough so that if you drop your rod and reel, you can pull it up by the line. 

  1. Wrap the line around the arbor of the spool.
  2. With the end of the line, make an overhand knot around the standing part.
  3. Make a second overhand knot at the end of the line an inch or two from the first knot.
  4. Pull the line so that the first knot slides down to the spool and the second knot is against the first.
  5. If needed, trim the end line, so it does not get in the way.

Attaching Lures to Fluorocarbon Line with These Easy Fishing Knots

You will want to ensure success with this connection, so use and make the right fishing knot.

Rapala Knot

The Rapala Knot, named for the company that invented it, is the easiest of all easy fishing knots for attaching lures to fluorocarbon line.

  1. Create an overhand knot approximately five inches above the end of the fishing line.
  2. Pull the end of the line through the eye of the line and through the overhand knot.
  3. Wrap around three times and take the end through the back of the overhand knot.
  4. Next, take the end through the loop that was created in the last step, and pull to tighten the knot.

Easy Fishing Knots to Prevent Slippage

The last thing you want to encounter is a slip of a bobber or slip float while fishing, so use the right fishing knot to prevent such a disaster. 

Stopper Knot

How to tie a Bobber Stop Knot

The Stopper Knot is great for anglers that use a slip bobber or slip float. This knot stops the slip bobber from moving past it.

  1. Much like the Uni Knot, you will want to calculate approximately six inches of fishing line. 
  2. With the stopper parallel to the fishing line, you will want to tie it and then fold it back to make a loop.
  3. Wrap around both lines approximately three to four times, taking it through the loop each time.
  4. Tighten by pulling the ends.

Easy Fishing Knots for Multiple Jigs, Baits, or Hooks

Strong, easy fishing knots will keep multiple hooks in place; therefore, you’ll want to choose a knot that is reliable and not time-consuming.

The Dropper Loop

Learn How To Tie The Dropper Loop Fishing Knot - WhyKnot
  1. Create a loop in the fishing line.
  2. Take a side of the loop and wrap it six or more times around the line (Do not wrap too many times, as this can cause tangling and twists).
  3. Take the loop through the middle opening, and tighten by pulling on the ends of the line.

It is important to know and practice the best knots for every situation. It can save you time and frustration when you are out there fishing. Knots only work when they are created correctly; therefore, you must learn and practice. When they are correctly made, they are a huge help in many areas of fishing. Knowing these knots will make your fishing easier and more successful, hence leaving you more time to worry about getting that prize catch.

Sharing is caring!

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.